Measuring instruments with a lot of attraction
– dosing solutions

Our electromagnetic flowmeters are mainly used in the food and beverage industry. They work according to the Faraday principle. Unlike all other electromagnetic flowmeters on the market, they operate in an alternating field (AC) instead of a synchronized DC field. The result is higher measurement dynamics and faster, more precise measurements for dosing the filling time up to 100ms.

Our products

MID-MDS

Modular dosing system (MDS) for filling conductive liquids in filling machines with electromagnetic flowmeters

Application:

Their function is based on conductive liquids (>1µS/cm) in filling machines. These machines are mainly used in the food and beverage industry as well as in the pharmaceutical and fine chemical industries. Among others, dairy products (also with fruit pieces), ketchup, mayonnaise, mustard, sauces, dressings, cleaning and washing agents, medical products (e.g. stomach gels), sterile injection products and cosmetics are measured.

Characteristics
  • easy cleaning compared to piston filler
  • easy adjustment of the filling quantities
  • no shear forces are exerted on the product
Special features
  • shortest dosing times from 100ms possible
  • small dimensions of the sensor
  • Complete systems for linear and rotary fillers
  • Large range of filling quantities with different nominal diameters
  • direct control of the dosing valve
  • CIP / SIP Cleaning
  • Replacement of the flow sensor possible without reprogramming
Batch-Controller
  • MID-MDS system for filling control (measurement and valves)
  • up to 540 electromagnetic measuring instruments MID and valves
  • with communication interface RS232 for communication with the PLC
  • MDS terminal for configuration and visualization of the MID-MDS system
  • UV 14 converter module for use of user-defined PLC
  • MID-PLC for the construction of small filling machines up to 4 devices and 4 valves
Technische Daten
Nominal sizeDN10 up to DN40 (3/8“ bis zu 1½“)
Process connectionTri-Clamp, hygienic connection for sanitary thread, sterile connections, sterile mini flanges
Materialstainless steel, PTFE, Hastelloy
Conductivity>1µS/cm
Flow range0,25 ms to 10 ms
Repeatability±0.1% (depending on flow rate)
Process temperatureup to 95°C (203°F) – Cleaning up to 95°C (203°F)
Prozessdruckup to 16 bar
Ex-protectionno
  • Chemistry and pharmaceutical
  • Food and beverage
A3

MID-MDS ECO

Compact magnetic inductive flowmeter for filling conductive liquids in filling machines

Application:

Their function is based on conductive liquids (>5µS/cm) in filling machines. These machines are mainly used in the food and beverage industry as well as in the pharmaceutical and fine chemical industries. Among others, dairy products (also with fruit pieces), ketchup, mayonnaise, mustard, sauces, dressings, cleaning and washing agents, medical products (e.g. stomach gels), sterile injection products and cosmetics are measured.

Characteristics
  • easy cleaning compared to piston filler
  • easy adjustment of the filling quantities
  • no shear forces are exerted on the product
Special features
  • compact design
  • small dimensions of the sensor
  • large ranges of filling quantities with different diameters
  • direct output of volume-proportional pulses
  • CIP / SIP Cleaning
Technical data
Nominal sizeDN2,5 up to DN40 (0,1“ bis zu 1½“)
Process connectionTri-Clamp, hygienic connection for sanitary thread, others on request
Materialstainless steel, zirconium oxide
Conductivity>5µS/cm, >20µS/cm for demineralized water
Flow range1 m/s to 12 m/s
Repeatabilityup to ±0.1% (depending on flow rate and nominal size)
Process temperatureup to 140°C (284°F) – cleaning up to 140°C (284°F)
Process pressureup to 16 bar, higher pressure on request
Ex-protectionno
  • Chemistry and pharmaceutical
  • Food and beverage
A3

FMD

The dosing mass flow meter extends the range of dosing sensors with a special focus on the dosing of non-conductive media and direct mass dosing.

Application:

The focus is on the measurement of non-conductive liquids with a low gas or solids content. This equipment is also designed for the measurement of oil, distilled water or alkanes. Due to the measuring principle, a direct measurement of the dosing quantity is possible.

Characteristics
  • compact design
  • direct measurement of mass
  • Measurement of non-conductive and conductive liquids
  • high accuracy / repeatability
  • no moving parts
  • easy to clean compared to piston filler
  • gentle product filling
Special features
  • outstanding fast filling
  • Fillings of 10 ml
  • very short dosing times > 250 ms
  • high accuracy / reproducibility even with small quantities
  • high resolution (e.g. DN10 : 63,660 pulses / kg)
  • Large selection of filling quantities with different nominal sizes
  • wear-free measurement
  • fully welded, no seals
  • combinable with controller MDS-PLC
Technical data
Nominal sizeDN10, DN15 (3/8“, ½“)
Liquid temperature0°C to +90°C (32°F to194°F)
Process connection

Tri Clamp according to DIN 32676

Sanitary thread according to DIN 11851

CleanabilityCIP / SIP up to 140°C (284°F)
  • Chemistry and pharmaceutical
  • Food and beverage

OD

Application:

The focus is on the measurement of non-conductive liquids. This meter is designed for the measurement of e.g. oil or demineralized water. Due to the measuring principle, an inlet or outlet section is not required.

Characteristics
  • direct measurement of volume
  • measurement of non-conductive and conductive liquids
  • high accuracy / repeatability also for small quantities
  • high long-term stability
Special features
  • Fillings from 10 ml possible
  • very short dosing times > 250ms
  • high resolution (e.g. DN10: 2000 pulses/l)
  • large selection of filling quantities with different nominal sizes
  • can be combined with the batch controller
Technical Data
Nominal sizeDN10,DN15,DN25
Process connectionTriClamp according to DIN 32676
Material

Housing: stainless steell

Oval wheels: stainless steel, PEEK

Seals: EPDM, alternatively Viton

Flow Range

0.2 l/min to 5 l/min  –  2,000 Pulses/

(0.05 gal/min to 1.32 gal/min)l

1 l/min to 30 l/min  –  1,000 Pulses/l

(0.26 gal/min to 7.93 gal/min)

2 l/min to 50 l/min – 400 Pulses/l

(0.53 gal/min to 13.21 gal/min)

4 l/min to 100 l/min – 200 Pulses/l

Accuracy±0,25% to ±0,5%
Repeatability±0,1%
Viscosity0,3 to 1.500 mPa·s
Process temperature

Liquid temperature: -10°C to +130°C
(-14°F to 266°F)

ambient temperature: -20°C to +70°C
(-4°F to 158°F)

Process pressuremax. 16 bar
Ex-protection
no
  • Chemistry and pharmaceutical
  • Food and beverage

Controllers

Compact dosing control
Series MDS-PLC

Application:

The field of application of the MDS-PLC is the control of meters and valves in small filling machines. The MDS-PLC configures the parameters and settings, visualizes the data and controls the valves.

By using this compact controller, manufacturers can quickly integrate the dosing functions into their filling machines. No additional PLC is required. The compact controller is operated via the external inputs or via the touch screen. All accuracy functions are integrated in the compact controller, even if a cost-effective PLC is used for other purposes in the filling machine.

Characteristics
  • for 4 counters such as electromagnetic flowmeters, mass flowmeters, oval wheel meters or others with pulse output
  • color touch panel
  • many functions from 30 years of experience in filling applications
Special features
  • 4 counting inputs 100 kHz
  • 4 valve outputs
  • suitable for fast filling applications
  • with overflow correction and max. dosing time switch-off
Technical data
Inputs

4 counting inputs
4 Start input
4 Stop inputs
1CIP input

Outputs

4 Valves outputs 0.2 A
4 Tolerance output
4 Outputs for closing the valve

Power supply24 VDC (20-28V)
Flow rangeup to 3.000m³/h
Temperature range0°C bis +50°C (32°F to +122°F)
Display

colour touch screen
320 x 240 Pixels

Size170 x 135 x 80 mm